Micro current body sculpting

Hello Darlin’ is delving into the wonderful world of Body Contouring.
Using our Microcurrent Body Sculpting (MBS) device , we can tighten, tone, lift, rejuvenate and sculpt your body to support and enhance your body shaping goals. The MBS device utilizes electrodes placed around the target treatment area on the body. These electrodes are connected via wire leads to the unit, through which electricity can pass and ultimately interact with sensory and/or motor nerves (depending on the type of current utilized).

While it may sound a bit intimidating, electrical stimulation really isn’t at all! When used correctly, electrical stimulation is a safe and efficacious modality.

The Microcurrent Body Sculpting device uses a combination of unique ultrawave signals and frequency rotations to access large muscle groups. The wide range of pulses and long stimulation times will activate large muscle groups through the skin. This causes your body to passively exercise. This treatment fires electrical impulses through electrode pads that imitate the way your body reacts to working out.
Many functions of the body are controlled by neurological electrical impulses. These impulses are transmitted naturally by the brain to specific organs and body parts. The Microcurrent Body Sculpting device simply imitates each one of these specific impulses in order to produce a range of different results such as slimming, muscle toning, working out, cellulite reduction and many more.
Muscle contractions are fundamental to muscle growth, development, and definition. When you repeatedly shorten and lengthen the muscle fibers, such as by doing sit-ups or biceps curls, you cause them to increase in both strength and mass. However, there are physical limitations to how many muscle contractions you can perform in the average workout. For one thing, it’s dangerous to perform strength-training exercises too quickly, as you could compromise proper form and end up injuring yourself.

In short, an e-stim device promotes many more muscle fibers to contract more frequently than is possible during a traditional workout.

Want to know more about it…
If you are interested in Microcurrent Body Sculpting in Wasilla, AK, call Hello Darlin’ at (907) 373-3307 today.

Here at Hello Darlin’, We’ll begin with a brief consultation and information session. We will talk about realistic goals and expectations, what areas to work and focus on, contraindications, etc. In a nutshell, we’ll find out if this the right avenue for you and then, we will devise an appropriate treatment plan to meet your unique needs and goals.
There will be some paperwork to fill out, questions asked and answered and even a complimentary mini session. This gives you an opportunity to be educated and to really know what to expect during your sessions.
Read on to get an even bigger picture of our Microcurrent Body Sculpting device or Book a consultation with one of our trained technicians.

Am I a good candidate for Microcurrent Body Sculpting ?
Men and Women who are starting or are already following a sensible nutrition and exercise program are well-qualified for this procedure. The MBS device enhances the progress you make in the gym. It serves as a supplement to the work you are already putting in.
It is also not for everyone; including:
⦁ people with deep vein thrombosis
⦁ people who are pregnant or nursing
⦁ people with pacemakers
⦁ people with impaired cognition.

Neither is it safe to use on every area; including:
⦁ on the anterior neck
⦁ face
⦁ breasts
⦁ over areas with damaged skin
⦁ over areas with decreased sensation

What to expect during my Microcurrent Body Sculpting session ?
Your comfort, safety and dignity are the number one priority. If there is a need to undress (you leave your undies on), towels and blankets will be provided for coverage. You’ll be asked to lie down in a comfortable position. Your skin in the target treatment area will be cleaned and prepped. The Technician will then place the electrode pads to the target areas. . The device is then switched on to deliver mild electric impulses. As a result, you will start to feel a tingling sensation.
The intensity of the impulses are easily modifiable and ultimately will only be as much as you can tolerate. You be completely aware of every step in your session. Intensity is increased slowly and completely based on your tolerance level. No matter how high or low, the intensity levels should never cause pain.

You will be able to relax in a comfortable, private room while the device stimulates the desired target areas. Each treatment lasts about 30 minutes and is entirely non-invasive, which means you’ll be able to pick up your daily schedule exactly where you left off.
What to expect after my Microcurrent Body Sculpting session ?
While there is no downtime necessary after a Microcurrent Body Sculpting session, you may feel a slight soreness and muscle fatigue, as if you had just completed a challenging workout. After all, as far as your muscles and nervous system are concerned, you did just undergo intense activities. If you experience soreness and tightness, you can stretch gently, just as you would do after a routine trip to the gym.
Some people experience mild redness where the electrode pads make contact with the skin. This is completely normal and should subside within a few hours. This treatment will not leave bruise marks on the skin.
Maintaining MBS results
As you’ve already realized if you have been working on your physical fitness for some time, you must put in the work to get to the reward. That means these sessions alone will not sculpt the shape you want if you don’t commit to keeping up with your results. However, the good news is that the rapid results you’ll see with MBS can serve as an excellent motivator. Finally seeing defined abs, arms, legs, and buttocks will make you want to work even harder to keep looking and feeling your best.

Frequently Asked Questions
As you learn more about the advantages of MBS for muscle definition and fitness gains, you may still need help determining if this innovative treatment is right for you. The following FAQs can shed some extra light on the subject.

Can MBS Help Me Lose Weight?
Microcurrent Body Sculpting is not a substitute for a healthy diet plan and a regular fitness routine. The goal of MBS is to integrate with your workouts to create better results than weightlifting and cardio alone.

Which areas can MBS target?
We can use MBS to target virtually any major muscle group, including your:
⦁ Abs
⦁ Glutes
⦁ Quads
⦁ Hamstrings
⦁ Biceps
⦁ Triceps
⦁ Pecs
⦁ Lats
⦁ Traps

Does MBS Create Permanent Results?
MBS results can be long-lasting, but for the best results, you will need to be willing to continue your efforts to reshape your body with exercise and nutrition.

Do MBS Treatments Hurt?
Nope! Microcurrent Body Sculpting sessions are generally painless and even relaxing. Though there is an electrical charge involved, you will not feel any shock or twinge. Only the muscles near the electrodes will contract. There is minimal risk of side effects when using EMS.

How Many Treatments Will I Need?
Depending on your concerns, we may recommend a series of MBS treatments spaced a few days or weeks apart to achieve your ideal results. You can also return for occasional touch-ups when desired. For example, if you feel your progress at the gym has plateaued, you may want to advance to the next level more quickly.

When Will I See Results?
You’ll likely notice an improvement after your first treatment, with continued results over the weeks to come. During this time, keep working out as usual. With the help of MBS, you can see faster gains in the muscle groups you are targeting.

If you’d like extra help toning and tightening your muscles and seeing less flab, contact us to learn more about our non-surgical Microcurrent Body Sculpting treatments to help you meet or exceed your aesthetic goals. At Hello Darlin’, our trained technicians specialize in MBS and many other Face, Skin and Body treatments.


    Your Cart
    Your cart is emptyReturn to Shop